Author Topic: Best strings for baritone? (Read 132 times)

maximum_guitars · « **on:** August 08, 2008, 05:19:14 AM »

I'm currently playing my baritone tuned to B. I'd like to go down to E, a full octave. When I did that, the strings were floppy. What strings should I get for this? XL? Like 52-12? I think they're 65-13 right now. Thanks in advance.

jorge_s · « **Reply #1 on:** August 08, 2008, 07:21:51 AM »

I also play a baritone. If you want to play in that bass guitar range without floppyness you will probably need to look more to the bass string range. Probably .100 for the low string to .025 on the high string. You will need to modify your nut and saddle however as well as the truss. Hope this helps.

maximum_guitars · « **Reply #2 on:** August 08, 2008, 01:04:50 PM »

Thanks. I'll just adapt to the b tuning for now. I got some 14-70's for it.

to_81_0190 · « **Reply #3 on:** August 10, 2008, 09:02:45 PM »

How about Jerry Jones six string bass string? The gauge is 084 072 056 044 034 024 EADGBE.

Toshiaki

maximum_guitars · « **Reply #4 on:** August 11, 2008, 01:24:09 PM »

I'll check them out. Thanks. What should I use to polish the body? It's an oil finish. Tung oil? I saw the losts for fretobards and lemon oil/tung discussions.

(Message edited by maximum_guitars on August 11, 2008)

adriaan · « **Reply #5 on:** August 12, 2008, 12:50:59 AM »

It's not an oil finish, but polyurethane which was used for Epics, Orions, Rogues and Excels for the first few years. Check the FAQ section for care instructions - IIRC it's the same as for the glossy finishes.

maximum_guitars · « **Reply #6 on:** August 12, 2008, 02:35:24 PM »

Really? It must be a very thin coat. I can feel the grain.

(Message edited by maximum_guitars on August 12, 2008)

tbrannon · « **Reply #7 on:** August 12, 2008, 09:13:17 PM »

I pulled up the old Ebay auction- it looks like the headstock is Wenge- is the top wood the same?

If so, I think Adriaan is right about the finish. I had a Wenge Rogue that had the old poly finish on it. I could still feel the grain on mine too- the wenge is pretty porous and you can feel the grain even with the poly finish they used then.

If you could post a picture of the top we could confirm it for you.

maximum_guitars · « **Reply #8 on:** August 13, 2008, 12:45:11 AM »

Thanks. Yes, I think it's wenge. I'm still awaiting specs.

keith_h · « **Reply #9 on:** August 13, 2008, 06:44:09 AM »

Here is the link in the FAQ where Mica discusses finishes. Yours is around mid-page.

Keith

maximum_guitars · « **Reply #10 on:** August 13, 2008, 07:45:01 AM »

Thank you very much.