Author Topic: Wanted: old Gibson bass bridge screw and saddle (Read 882 times)

sonicus · « **Reply #15 on:** November 04, 2013, 08:24:44 PM »

Hi
Go to eBay and log in a search with notifications . I see this gibson bridge type on ebay very often . Ebay will send you an email when the specimen that you desire shows up !

gtrguy · « **Reply #16 on:** November 06, 2013, 10:12:20 AM »

Yes, I check EBay every day. The whole bridge assembly seems to sell for around $175, which is too much when I just need the one screw and saddle.

I can't play the bass as it is.

hieronymous · « **Reply #17 on:** November 06, 2013, 04:33:32 PM »

Dave, I'm so sorry, I haven't been able to find mine.

gtrguy · « **Reply #18 on:** November 06, 2013, 08:03:44 PM »

I thank you so much for looking!!!

cozmik_cowboy · « **Reply #19 on:** November 06, 2013, 08:54:14 PM »

Buy a piece of nylon 6/6 and cut your own.

Peter

hieronymous · « **Reply #20 on:** November 07, 2013, 10:47:18 AM »

He needs the screw as well

gtrguy · « **Reply #21 on:** March 15, 2014, 12:46:57 PM »

Still hoping to find one!

poor_nigel · « **Reply #22 on:** March 15, 2014, 01:28:50 PM »

I saw one of these on eBay a few years ago and it included the posts and holders that go into the bass for $50. So I bought it, as I have several old Gibsons that use em. You are looking for a shorter saddle and saddle screw, yes? E-mail me your shipping address and it is yours, next time I go to post something. Nerf! Sorry I do not come read stuff very often, anymore.

poor_nigel · « **Reply #23 on:** March 15, 2014, 01:36:55 PM »

Are you looking to replace the E string one, or E and G? Mine are stock, so do not have grooves filed into them. Best to explain things simply to me, as I am pretty dumb. Did you file the E one down, as it was a 'middle' one/taller one?

poor_nigel · « **Reply #24 on:** March 15, 2014, 02:03:05 PM »

Opps, I misspoke myself, like a true politician. These did come with grooves. I found four saddles, all the same size (Told ya I was dumb these daze), grooved from E to G size. Found three screws in a box with a complete set of LP Triumph guts I bought just for the pick-up rings a decade or so ago. So all I need is your address and you should be good to go in a week or so.

poor_nigel · « **Reply #25 on:** March 15, 2014, 02:48:09 PM »

http://www.flyguitars.com/gibson/bass/parts/bridge/#24

OK, typical Gibson consistency in the products over any given time span, no matter how short the duration . . . The picture seems to show un-grooved saddles, and it might just be the angle, but on the two saddles/screws by themselves in the picture, one looks taller/thicker on the shoulders than the other - As I seem to remember. My basses are put away in their closet, so too much of a hassle for me to check this out on. OK, I will shut up and go away now.

gtrguy · « **Reply #26 on:** March 16, 2014, 10:56:21 AM »

Now that's a handy web site! Yes, that earlist bridge is the one, with those nylon saddles. What a goofy design that bridge is!

gtrguy · « **Reply #27 on:** March 24, 2014, 11:14:53 AM »

Thanks to poor nigel I now have the part I am looking for!!!!!

poor_nigel · « **Reply #28 on:** March 24, 2014, 09:07:46 PM »

Good. If ya see someone on here looking for something you have an extra of, 'pay it forward.' Never saw the movie, but I liked the concept advertised in its commercials . . .

poor_nigel · « **Reply #29 on:** March 24, 2014, 09:07:55 PM »

Good. If ya see someone on here looking for something you have an extra of, 'pay it forward.' Never saw the movie, but I liked the concept advertised in its commercials . . .