Author Topic: Strap locks? (Read 1026 times)

sonicus · « **Reply #15 on:** June 09, 2009, 01:19:22 PM »

Hi Mica ,
I don't think that that is a little crazy at all. it's always to better to safer then sorry, especially when it comes to our most prized instruments;such advice is priceless.

David Houck · « **Reply #16 on:** June 15, 2009, 04:57:15 PM »

I've added Mica's comments to the FAQ section.

zooberwerx · « **Reply #17 on:** June 15, 2009, 07:32:33 PM »

I just installed a set of gold Dunlops. Be sure to use the enclosed screws not the old ones. I place a felt pad under each strap pin and soap the screws liberally. Take your time and use a clean PH bit. I've never had one loosen or back out.

Riis

David Houck · « **Reply #18 on:** June 15, 2009, 08:19:49 PM »

Hi Riis; welcome to the board!

dannobasso · « **Reply #19 on:** June 15, 2009, 09:33:14 PM »

I've had a few bad Dunlop experiences so I prefer the Schalers. They instil confidence but they still have to be checked as Mica suggests.

olieoliver · « **Reply #20 on:** June 15, 2009, 10:05:16 PM »

HI Danno! Where you been hidin' brother?

I've had both Schaller and Dunlop give loose on me. I use the Dunlop now mainly because I like the recessed locks. Nice clean look.
Danno is correct though, always check the lock and the button.

OO

georgie_boy · « **Reply #21 on:** June 16, 2009, 06:25:50 AM »

I replaced the buttons on my Series 1 with Schaller.
I did exactly what Adriaan did....easy!!!
I've just re-checked them after reading this post.
All is well.
ALWAYS check both the instrument AND the strap on a regular basis!!

(Message edited by georgie_boy on June 16, 2009)

olieoliver · « **Reply #22 on:** June 16, 2009, 06:40:58 AM »

Yep George at our age we need to have the butt-on checked regularly! ;(

OO
(Sorry couldn't resist!)

georgie_boy · « **Reply #23 on:** June 16, 2009, 08:08:13 AM »

You better believe it brother!!

terryc · « **Reply #24 on:** June 16, 2009, 01:47:15 PM »

That was a bit b(anal) wasn't it???

jphilauren · « **Reply #25 on:** July 03, 2009, 12:30:27 PM »

Loctite on the screw going into wood might that not have a damaging effect on the wood. Thought Locktite was for metal on metal applications. I agree with Locktite on the metal nuts especially with thicker staps, just purchased Italia Straps, they had buy one get one free sale. Only problem is the thickness of straps