Author Topic: New member (Read 1595 times)

mack_sanders · « **Reply #30 on:** January 09, 2012, 07:16:32 PM »

Mack with 1045

David Houck · « **Reply #31 on:** January 10, 2012, 03:14:55 PM »

Beautiful guitar!!!

Welcome to the club!

mack_sanders · « **Reply #32 on:** January 11, 2012, 10:17:29 AM »

davehouck, thank you!

slawie · « **Reply #33 on:** May 08, 2012, 04:43:39 PM »

Is that a triple walnut stringers in the neck recipe?
Welcome to the club
slawie

edwin · « **Reply #34 on:** June 20, 2012, 10:41:41 PM »

I checked out the videos on your website. Great job! As a bass player I have to say that I really appreciate your drummer. Mad skillz, but also knows when to just lay that backbeat in just the right place. The Alembic sounds great, too!

tncaveman · « **Reply #35 on:** June 23, 2012, 07:52:35 PM »

The vids are really cool - great mixing and playing. Everyone in the band is good - a rare sight.

Stephen

mack_sanders · « **Reply #36 on:** August 29, 2012, 12:55:00 PM »

Slawie, 1045 is a purple heart, maple neck with rosewood fret board. Front & back are cocobolo, maple and mahogany. Edwin, Tncaveman, thank you.
I re-fretted recently and it has be come a test bed for experimentation with fret crown profiles (Fibonacci)micro tuning and work hardening.
It stays on the bench until all notes are dead on.

mack_sanders · « **Reply #37 on:** August 29, 2012, 01:47:44 PM »

PS, does anyone have suggestions on how to cure a noisy f2-b? Changed out the power supply caps and tubes. lots of hiss.

edwin · « **Reply #38 on:** August 29, 2012, 02:59:04 PM »

If it's an older unit, I would suggest looking at the plate resistors. That's the classic place where the Fender preamp designs get noisy after a number of years. It's an opportunity to try different resistor types.

edwin · « **Reply #39 on:** August 29, 2012, 03:22:35 PM »

If it's an older unit, I would suggest looking at the plate resistors. That's the classic place where the Fender preamp designs get noisy after a number of years. It's an opportunity to try different resistor types.

mack_sanders · « **Reply #40 on:** September 04, 2012, 09:09:31 AM »

Edwin,thank you. The F2-b is #857, somewhere around 1980. I have difficulty understanding tubes, but I have noticed that a recent installation of Fender/Russian/12AX7/7025's sounded good but had fry noise and a pair of Russian/ Mullard 12AX7/ECC83's seemed softer with richer even order harmonics, but with a lot of hiss. Any guidance is appreciated.

elwoodblue · « **Reply #41 on:** September 08, 2012, 05:28:48 PM »

Great Photo's Mack,
I have a close cousin of #1045, a series one guitar-serial #1100,
....joy

It's good to see 1045 ( and You ) in action.

Keep it up !!
Elwood

mack_sanders · « **Reply #42 on:** February 14, 2013, 11:09:52 AM »

Hey elwoodblue, thank you . Do you have photos posted of 1100?
Edwin, I recently found TAD 7025 W/A RT080 tubes from The Amp Dr. The F2B improved dramatically.