Author Topic: Series I guitar, hotrodded (Read 924 times)

johnp · « **on:** February 14, 2013, 09:22:12 AM »

Here is my contribution to the communal Alembic porn stash. This is a Series I, and unless my eyes deceive me, it is the very guitar featured on Alembic's Series I page. The original owner upgraded it with Series II electronics and a Roland MIDI pickup.

Just got it a few days ago from the nice folks at Wildwood Guitars in Colorado, and have had to remember to eat and sleep ever since.

lbpesq · « **Reply #1 on:** February 14, 2013, 09:34:25 AM »

John:

Welcome to the club and congrats on your new Alembic. Beautiful guitar! Looks like you have a few extra knobs there. So what do they all do?

Bill, the guitar one

cje · « **Reply #2 on:** February 14, 2013, 09:48:33 AM »

I've always liked that guitar. My guess for the extra controls are:

MIDI patch up/down (small buttons above 5-pin XLR)
MIDI/guitar/both switch under 1/4 jack
and one of those knobs would be the MIDI volume

I'd love to hear what that guitar sounds like - any chance of posting some clips at some point?

pierreyves · « **Reply #3 on:** February 14, 2013, 09:59:40 AM »

one of the nicest I never see... if its not THE nicest :-)

johnp · « **Reply #4 on:** February 14, 2013, 10:47:01 AM »

Thanks, ibpesq - great to be among the Happy Few...! The far-right button is the MIDI volume, the two little ones, as cje says, are MIDI up/down, and I believe the switch under the 1/4 jack is the stereo/mono toggle (haven't been able to try it yet). I am going out of town for a while, but will try to post a clip or two of it when I return.

musashi · « **Reply #5 on:** February 14, 2013, 09:23:53 PM »

Wow. I agree with Pierre-Yves.

JuancarlinBass · « **Reply #6 on:** February 15, 2013, 04:54:14 AM »

I wonder... in this case will still the guitar audio come out from the GK 13-pin connector? Should be the two cables (The Alembic power supply/audio one AND the GK's 13-pin) connected at the same time to have both the guitar and synth sounds simultaneously? In that case... would the Guitar/Synth/Both switch still work the same? I'm having a hard time already trying to get my GK Strat system under control...

jazzyvee · « **Reply #7 on:** February 15, 2013, 06:04:59 AM »

That is indeed a splendid guitar. I've been impressed by that guitar too and have photo's of it in my favourite alembics iphoto album It did cross my mind a while back to try to acquire.

I've glad you have bought it let us know what you think of it if/when you gig with it.
Jazzyvee

jazzyvee · « **Reply #8 on:** February 15, 2013, 06:07:31 AM »

That is indeed a splendid guitar. I've been impressed by that guitar too and have photo's of it in my favourite alembics iphoto album and it did cross my mind a while back to try to acquire it.

I've glad you have bought it and please let us know what you think of it if/when you gig with it.
Jazzyvee

johnp · « **Reply #9 on:** February 15, 2013, 11:14:20 AM »

@Jcdlc72: What I do is send the MIDI synth output to one amp and the guitar to another: that lets me tweak the two independently. Do you want to run them together for reasons of floor space? Any other MIDIphiles out there? What do you do?

This guitar has no Guitar/Synth switch - both are always on, in effect. The rightmost knob in the photo controls the MIDI volume (the switch underneath it is for the LEDs). Between that, the guitar's master volume, and the volume pedal on the Line 5 hd500 I use, there are lots of realtime mixing possibilities.

@Jazzyvee: maybe someday when I'm feeling more blas? I will take this on a gig. For the moment, it's not leaving the house! It's strange - I went through the Alembic site a few months ago, and really liked the look of the one on the Series I page. If only it had the series II electronics, and MIDI... And lo, googling around one day, there it was, that very guitar, for sale with just those mods... A coincidence? I think not.

dadabass2001 · « **Reply #10 on:** February 15, 2013, 02:35:37 PM »

I would love to hear what this (guitar output) sounds like. It should be amazing with the ebony lams in the neck and series II controls!
Congratulations on a beautiful find.
Mike

lbpesq · « **Reply #11 on:** February 15, 2013, 08:24:51 PM »

I suspect what Juan Carlos was asking was whether you use two output cables (Alembic 5 pin + synth 13 pin), or just the synth cable. I have a Roland GR-33 synth and I can run both the guitar signal and synth signal through the 13 pin synth cable and still split the signal into two different amps. I use a standard guitar amp for guitar and a Roland keyboard amp for the synth. I'm using a heavily modified Fernandes with Alembic guts and RMC piezos. I can switch between guitar only, synth only, or both at the same time. (Playing guitar and organ at the same time is cool!). But my Ferlembic doesn't have series electronics.

Bill, tgo

JuancarlinBass · « **Reply #12 on:** February 15, 2013, 10:44:56 PM »

What I did was building myself a sort of 2-floored pedalboard. On the Top shelf is a Roland GR33 synth board which is directly fed via the 13-pin GK cable from a Fender Roland Ready Strat (built-in GK-2a, separate Guitar/Synth volume knobs -single tone pot for the guitar pups- MIDI up/down switches, and 3-way toggle Guitar/Synth/Both switch). From the Guitar out: jack in the GR33 I go into a modified (changed tube and lowered noise floor) Art Tube MP which is set just below the shelf, and from there I go to a Digitech RP2000 pedal, which then handles all my guitar effects for this setup. Then I return -in stereo, speaker simulation activated- to the GR33, and go out in stereo to a double channel DI box also fixed on the lower floor along with a power strip which holds all the P/S. The board has a swivel so I can fold it and get it inside a decent-sized travel suitcase, when I get to the venue I only have to take it out, spread it open, and connect 2 XLR's, the AC cord and the 13-pin cable from the guitar. Since I mix and control the Synth/Guitar mix (as well as adding/substracting sound on the synth patches with the GR33's expression pedal) I mostly have to play sitting down (is quite hard not to fall over while playing and handling all the pedals). I am mostly using this rig in a small group where I have to play bass/guitar/synth lines altogether, therefore I go direct to PA to avoid further hassle. Not the best sound in some cases -specially guitar OR bass- but I have to keep it somewhat portable and versatile. Some weeks ago we had the chance to play with a real keyboard player and I brought a bass instead, it was SUCH a breeze having not to worry on playing several instrument lines at once for a change!

johnp · « **Reply #13 on:** February 16, 2013, 11:24:52 AM »

I have a GR-55, and with a Godin Multiac Jazz, 'guitar out' on the GR-55 works as you guys are using it (the Godin's piezo pickups providing both GK data and straight guitar). With the Alembic, though, 'guitar out' on the GR produces nothing. Its GK pickup was added after the fact, and is apparently the only thing feeding the 13-pin - so I'm using both 5-pin and 13-pin outputs. An added benefit of the 5-pin: the LEDs work - woohoo!

The Alembic, btw, came with an Axon AX100 mkII, which is really nice - a shame the company went under. It doesn't have the COSM stuff, but seems to track as well as the Roland and has much better synth sounds, IMO.

tncaveman · « **Reply #14 on:** February 19, 2013, 07:55:02 PM »

WOW. That's a gorgeous guitar. Welcome to the club John.

Stephen