Author Topic: Phil Lesh's Custom Omega Cut Alembic  (Read 7784 times)

Googe Endeveronte (goooge)

  • Guest
Phil Lesh's Custom Omega Cut Alembic
« on: October 06, 2002, 10:18:24 AM »
this picture is from portland 1979-those of you who know is notice the osage orange wood has really darkened up and notice that the additional hardware (located behind the bird tailpiece) is on the bass in this picture-looks like individual string saddles-maybe the original tailpiece was replaced-

Googe Endeveronte (goooge)

  • Guest
Phil Lesh's Custom Omega Cut Alembic
« Reply #1 on: October 06, 2002, 10:22:00 AM »
from guitar player november 1977- explaining a bit about the above bass:
 
Today the Godfather is Phil's spare. His main bass is a custom-made Alembic with additional circuitry designed by George Munday of Pluto Electronics. Phil also uses George's tone-modifying Pluto Pedal, an active filter/boost/cut unit in which two filters can be swept at once. Phil likes it because of its versatility for bass tone modification. Nevertheless, he complains that too many pedals only perform one or two functions. I still have a dream of a computer-controlled synthesizer/quadraphonic bass, he says, and the instrument I'm playing now has the capability of being that. All it needs is the proper interface.
 
      The Alembic has the same pickup configuration found on the Guild: two standard humbuckers and a quad. Though he can get a separte signal for each string, Phil currently is running his signal monaurally. The filters on both the Guild and the Alembic basses allow for 32 tone settings, with a mixing of filtered and flat response signals from the pickups. The filter modules contain controls for Q (resonance), bandwidth, frequency reponse, and filter mode (to allow for lowpass, bandpass, highpass, and notch filtering). The filters are essentially Phil's design, though Alembic built them, and George Munday redesigned them to Phil'specifications.
 
     His favorite tone settings center around the use of the bandpass filter, though he explains that he generally just tries to blend well with what the other musicians are doing. He usually plays with a pick, though on extremely rare occasions he uses his fingers. The Fender Heavy he has relied on for the past few years replaced a Carpe Plexiglas pick he favored until its manufacturer folded. His string choice is D'Addario Half Rounds, gauged at .045, .060, .075, and .090. He previously used Framus and Pyramid strings. He always puts on new strings before going into the studio to record, but on tour he changes them only as necessary.
 

Googe Endeveronte (goooge)

  • Guest
Phil Lesh's Custom Omega Cut Alembic
« Reply #2 on: October 10, 2002, 08:12:06 PM »
Hey Mica-are there any good shots of the fretboard inlays of this bass in your files??I remember first seeing this bass and remembering that I had never seen such detail before(1974) with the exception of (greg lakes'I think) detailed metal zematis guitar.

Edwin Hurwitz (edwin)

  • Guest
Phil Lesh's Custom Omega Cut Alembic
« Reply #3 on: December 25, 2002, 09:50:30 AM »
I like this picture, but it's been hard to look at for me so I did some quick color correction to get it back in the ball park. It's quick and dirty, but I hope you like it! If I had a larger file I could do much better.

Googe Endeveronte (goooge)

  • Guest
Phil Lesh's Custom Omega Cut Alembic
« Reply #4 on: December 27, 2002, 12:40:04 PM »
thanks edwin!-I am a freak about this particular bass as I think you are the Godfather-
thanks for the clean up-also- you notice in this picture the part of the body top near his forearm? what is going on there?- I have read that this bass de-laminated-wonder if that is the spot?also he changed the bridge tailpiece to what looks like individual pieces vs the bird tail piece he had originally-
I would love to see a clear pic of all the inlays on this bass too. For one of the all time coolest alembics there are not many pics of this bass around.  hmm
 

Edwin Hurwitz (edwin)

  • Guest
Phil Lesh's Custom Omega Cut Alembic
« Reply #5 on: December 29, 2002, 10:12:39 AM »
I am not completely sure, but I think that the part that delaminated was the neck. On the body near the forearm might be just carving. I saw Phil play this bass a bunch in the 70s and it sounded great, although he was usually too low in the mix in those days.
 
Edwin

Donald Pasewark (pasewark)

  • Guest
Phil Lesh's Custom Omega Cut Alembic
« Reply #6 on: April 01, 2003, 03:35:22 PM »
Here's a decent pic of that bass. I pretty sure this is an Ed Perlstein shot.

Joey Wilson (bigredbass)

  • Guest
Phil Lesh's Custom Omega Cut Alembic
« Reply #7 on: April 01, 2003, 11:03:07 PM »
OK. . . I'm short enough of the lore of the Dead, but what the hell is 'Osage Orange'?
 
Joey

Googe Endeveronte (goooge)

  • Guest
Phil Lesh's Custom Omega Cut Alembic
« Reply #8 on: April 04, 2003, 09:26:09 PM »
osage orage is a tree that grows in the midwest-the indians made bows from it- I have heard it called bodark and Bow d'arc-not sure of the latin name-check ebay-usually someone has some for sale
I have some-it is very yellow orangish when first cut-very stiff stuff-brown up with exposure to air/light-
apparently the tree itself is a nasty thing with serious thorns-farmers plant them in rows as a natural fence of types-the tree bears fruit-many people also use the wood to make fence posts-apparently the wood is very rot resistant

Googe Endeveronte (goooge)

  • Guest
Phil Lesh's Custom Omega Cut Alembic
« Reply #9 on: April 07, 2003, 05:07:59 PM »
here is a shot before the bass was finished-these pictures can be found in the Historic Pics section of this website (see site index)
 
anybody got a better shot of the inlays??
also notice the bridge has changed over the years-looks like individual string saddles replaced the bird tailpiece.
 
Hey Mica- what is the neck of this made out of?-

Googe Endeveronte (goooge)

  • Guest
Phil Lesh's Custom Omega Cut Alembic
« Reply #10 on: April 07, 2003, 05:13:34 PM »
here is another I found on the harddrive-dont remember where i found this one-says 10-74 on photo- winterland I guess

Donald Pasewark (pasewark)

  • Guest
Phil Lesh's Custom Omega Cut Alembic
« Reply #11 on: April 07, 2003, 06:09:33 PM »
Cool!

Donald Pasewark (pasewark)

  • Guest
Phil Lesh's Custom Omega Cut Alembic
« Reply #12 on: April 07, 2003, 06:11:41 PM »
By the way, whats the retangluar thing on the lower left of the body next to the omega cutout?

Googe Endeveronte (goooge)

  • Guest
Phil Lesh's Custom Omega Cut Alembic
« Reply #13 on: April 08, 2003, 08:50:15 PM »
I have wondered about that myself Donald-hey Mica-????? It looks like a brass plate with possibly a couple of dip switch type things on it- if you have the grateful dead family album- check the picture on page 131- it also shows the replacement bridge on that photo-I have a video of the 78 saturday night live show they did- the bass is REALLY dark-cant really tell about the rectangular thing
 
One thing of interest on this bass is that besides having 11 knobs- there were also the 10 white push buttons on the upper half of the bass-each with its own red LED light-if you watch the grateful dead movie you will also notice that the back panels are completely removable and the body is just chock full of electronics- man I love that bass!!!

cdf

  • club
  • Member
  • *
  • Posts: 101
Phil Lesh's Custom Omega Cut Alembic
« Reply #14 on: December 04, 2003, 08:35:33 AM »
I just saw the newly released Closing of Winterland DVD last night, which featured this bass (as well as J. Garcia's Tiger guitar). This is one incredible sounding and looking bass. There are many terrific sequences of P. Lesh and his bass at work. Looks like about as many controls as a 747 ;-)  Everyone was really on that night. The mix could be a tiny bit better, but all in all a great DVD, highly recommended.