Author Topic: Installation Instructions for a 3-way Q-Switch for an Essence (Read 392 times)

ajdover · « **on:** December 02, 2013, 06:37:25 PM »

Folks,

Anyone have a copy of the installation instructions for a 3 way Q-switch on an Essence? I got the switch today, but didn't get the instructions. My guess is it was just a simple oversight, no biggie, but rather than bother Mica for it (I know she's busier than a one-armed paperhanger!) if anyone can hook a brother up, I'd appreciate it.

Thanks,

Alan

sonicus · « **Reply #1 on:** December 02, 2013, 07:05:04 PM »

HI Alan,
You will find .pdf instructions here ; Is this the correct file that you need ?
http://club.alembic.com/Images/393/13732.html?1099373700

Wolf

(Message edited by sonicus on December 02, 2013)

ajdover · « **Reply #2 on:** December 02, 2013, 07:33:09 PM »

Wolf,

I think so. I see its for a SPDT (single pole, double throw) switch. Will this work with a three way Q? My guess is yet, but someone smarter than me needs to chime in .... ;-)

Thanks,

Alan

sonicus · « **Reply #3 on:** December 03, 2013, 12:09:07 AM »

Alan, what is the contact description for the switch that you have ?
I noticed SPDT as well ____.
Perhaps the above instructions are for an older version ? I do not know what the current version is. The above is what I found on this site .

xlrogue6 · « **Reply #4 on:** December 03, 2013, 09:13:33 AM »

3 position would be similar, but probably uses either a 3 position (on-off-on) SPDT or possibly a DPDT on-on-on. Been a little too long since my days at the Mothership so I don't remember which.

sonicus · « **Reply #5 on:** December 03, 2013, 09:42:39 AM »

Thanks , my thoughts were as per your description. I was just helping for the search. I am sure Mica will chime in and tell it like it really is ____

ojo · « **Reply #6 on:** December 03, 2013, 11:29:46 AM »

I just bought and installed one of these, lemme know if you want me to scan my instructions - they are a basically the same as the one linked above.

Oh, and I think the three position switch is on-on-on.

ajdover · « **Reply #7 on:** December 03, 2013, 12:18:16 PM »

Ojo,

That would be great if you could scan and send them to me, or post a link to it! Thanks!

Alan

xlrogue6 · « **Reply #8 on:** December 04, 2013, 08:48:32 AM »

Adding the scan to the club knowledge base would be swell.

ojo · « **Reply #9 on:** December 04, 2013, 02:30:56 PM »

All right, I'll scan the instructions tomorrow, and I'm happy to post it to the forum as well. Share the wealth, that's what I say!

Joe

sonicus · « **Reply #10 on:** December 04, 2013, 02:42:36 PM »

That would be really cool and swell as well !

Thanks

lidon2001 · « **Reply #11 on:** December 04, 2013, 05:19:09 PM »

3 way switch:

cozmik_cowboy · « **Reply #12 on:** December 04, 2013, 08:52:26 PM »

You know, I can make a good connection, but my soldering doesn't really look like that..........

Peter

ajdover · « **Reply #13 on:** December 04, 2013, 10:22:00 PM »

Joe,

You're the man, and many thanks!

Alan

ajdover · « **Reply #14 on:** December 08, 2013, 07:21:43 PM »

Joe - get a chance to scan the instructions yet?