Author Topic: Europa (Read 610 times)

gil · « **on:** March 26, 2014, 06:37:59 AM »

I have a gorgeous 5 string Alembic Europa from 1989 or 1990 (can't remember). It's in great condition. I make almost all my living playing classical upright. The bass has been in the closet for most of its life. I'm in need of another bass bow and have decided to downgrade on my electric bass. What would be a fair price for this?

gil · « **Reply #1 on:** March 26, 2014, 06:41:04 AM »

gil · « **Reply #2 on:** March 26, 2014, 06:43:19 AM »

gil · « **Reply #3 on:** March 26, 2014, 06:45:22 AM »

gil · « **Reply #4 on:** March 26, 2014, 06:48:03 AM »

gil · « **Reply #5 on:** March 26, 2014, 06:50:07 AM »

bsee · « **Reply #6 on:** March 26, 2014, 08:44:16 PM »

Well, this one could be more complicated. The electronics are custom, certainly not vanilla Europa. It looks like you might have four knobs and two switches. It could be signature or anniversary electronics and an odd control layout, or it could be something else. Are you the original owner? If so, do you have the build sheet that came with the bass? You might also post the serial number in the request forum and Alembic might be able to look up and post the specifics of the build. From the back of the bass, it would appear that you have LEDs from the battery compartment. I would also guess that the hardware has been chromed from the way it appears in the photos. It's clear that the top is a flamed maple, but the stain makes it hard to be certain about the wood for the body (maybe ash from the little grain I see in the last pic) or neck stringers (probably purpleheart, but maybe walnut or vermillion).

The serial number looks like it starts out 90C..., an indication that Alembic classified the bass as a custom build rather than a Europa. You're probably at least $3K and possibly $4K depending on the buyer and how long you're willing to wait to make a sale. Hard to say for sure without knowing the build details. It is in the best interest of both you and the buyer to confirm the build details. No one wants a surprise in a $3-4K transaction.

-bob

gil · « **Reply #7 on:** March 26, 2014, 09:37:49 PM »

Thanks Bob. Where is the request forum? The serial # is: 90C 6186 USA

hifiguy · « **Reply #8 on:** March 26, 2014, 10:50:25 PM »

It's on the Club's front page under Owning An Alembic. It may take Mica a while to get and post the details but a bass that recent should be in the Alembic archives.

Bob is right - that is _definitely_ not a garden variety Europa and is absolutely a custom with that s/n prefix but it sure is gorgeous. I am now suffering from severe GAS pains.

keith_h · « **Reply #9 on:** March 27, 2014, 05:06:32 AM »

A simple question is what do each of the controls do?

This would go a long way to determine what you have for electronics. I assume one of the switches controls LED's.

Keith

gil · « **Reply #10 on:** March 27, 2014, 07:35:40 AM »

Yes Keith, one of the switches is LED's. I was never sure what the other two were. One is for the neck pickup and the other for the bridge pickup. In one position the bass has more presence, more brilliance and possibly louder. I'm not sure if in that position it is a boost or that the other position is a filter. My guess is the latter.

The controls is simpler: pan, volume, tone, tone.

~ Gil

keith_h · « **Reply #11 on:** March 27, 2014, 09:32:56 AM »

Sounds like Signature electronics to me. The two switches would be Q-switches. These boost the frequency where the filter (tone) control is set by 9db (?) if they are two position. This would be considered an upgrade from standard Europa controls.

Keith

eligilam · « **Reply #12 on:** March 27, 2014, 12:07:03 PM »

The pics almost make the fretboard look like rosewood...

gil · « **Reply #13 on:** March 27, 2014, 12:08:55 PM »

Thanks Keith.

bsee · « **Reply #14 on:** March 27, 2014, 01:18:59 PM »

Gil,

If you have time to plug it in, the LED switch is obvious. With the other two switches, off is usually in the up position and down is on. Your two tone controls are most likely low-pass filters, one for each pickup. The switches are what we call Q switches, and they will provide a small boost centered on the knuckle frequency of the filter, wherever you have it. One easy way to demonstrate this and confirm what goes with what is to turn the switches on and max the volume. Push the balance all the way in one direction and play a note. Then spin each of the filter controls in turn. One of them won't seem to do anything and the other will make a wah-wah like effect. That filter goes with the pickup that is currently active. Flip one of the switches, and if the wah-wah goes away, that switch goes with that filter. Reverse the pan control and the other switch and filter should now be active.

It does seem likely that these are signature electronics and LEDs. I have a bass with similar electronics, but a different body, scale length and only four strings. I wouldn't sell mine for under $3500, maybe as low as $3K if I were desperate for cash. Yours should be worth a few hundred more to the right buyer.