Author Topic: Wiring diagram (Read 289 times)

nikobask · « **on:** January 30, 2009, 07:11:03 AM »

Hi
I need a Signature bass wiring diagram !
i broke the volume and balance pots

Thank you very much
Niko

nikobask · « **Reply #1 on:** February 02, 2009, 09:51:57 AM »

no one could send me a picture of the control cavity i don't know where i need to the solder the wires to the pan pot?
thanks
Niko

nicolaschelly (at) hotmail.com

David Houck · « **Reply #2 on:** February 02, 2009, 09:56:15 AM »

Hi Nicolas; perhaps if you posted some pics of the problem, somebody here might be able to help identify which wires need to be soldered where.

nikobask · « **Reply #3 on:** February 02, 2009, 10:04:55 AM »

nikobask · « **Reply #4 on:** February 02, 2009, 10:07:58 AM »

when i tried to set up my vol pot it turnd on itself and broke the v pot and the pan pot's jumper broke too?
so i need a pan pot and a wiring scheme!

thanks all my Alembic friends
Mica forget to send me a Pic!!

nikobask · « **Reply #5 on:** February 03, 2009, 08:07:01 AM »

nikobask · « **Reply #6 on:** February 03, 2009, 08:08:52 AM »

nikobask · « **Reply #7 on:** February 03, 2009, 08:11:18 AM »

Hi

it's terrific i need my bass quickly and i don't know how to do ?
the pan pot seems broken ?
maybe could i go direct without pan?

thanks to help me brothers ans sisters

Love

nikobask · « **Reply #8 on:** February 03, 2009, 12:04:03 PM »

Hey
can i have a pic of the signature cavity? it seems that a board lacks near the pan pot??
It's to hard living without my 5 i need it for my work ?

Thanks

mica · « **Reply #9 on:** February 03, 2009, 01:12:35 PM »

For the year of your Signature bass, there is no board that the pot mounts on. Here's a diagram of what you need to do when you get the replacement pot:

As you can see, they came off in order - so it should be easy to navigate.

The terminals of the pot are probably still on the end of the wires I have labelled. You should not have them in the wiring when you reattach the terminals.

Edwin will confirm with me tomorrow about the pan pot - I'll let you know.

nikobask · « **Reply #10 on:** February 03, 2009, 01:18:05 PM »

cooool
the terminals are out (jumpers)

Mica is ther an upgrade for the signature electronics
or upgrade?

Hi from Paris

mica · « **Reply #11 on:** February 03, 2009, 02:12:42 PM »

Also, check that the nuts on the filter pots are not loose. Just make sure you know how to remove the knobs so you don't damage the pots.

It's probably a good idea to check the screws holding the straplocks in for the same reason. Over time the wood cells will compress slightly under pressure. Anything that you want to stay firmly attached needs to be check periodically.

nikobask · « **Reply #12 on:** February 03, 2009, 02:19:10 PM »

Thank you Mica
you are very nice !

Love
Niko