Author Topic: F-2B Question (Read 615 times)

David Houck · « **Reply #15 on:** July 19, 2015, 03:32:19 PM »

Ah! Got it!

jazzyvee · « **Reply #16 on:** July 19, 2015, 04:51:58 PM »

Ok so you are essentially taking a mono signal out of your guitar, splitting it into two and processing the highs and lows into stereo by frequency instead of by pickup.

So could I do a similar thing with the two F1-x's I have in my bass rig when using for a non series bass and two cabs. Take the input 2 of one F1-x into input 1 of the 2nd F1-x then follow through to two independent channels of my power amp to two speaker cabs?

lbpesq · « **Reply #17 on:** July 19, 2015, 05:53:16 PM »

I know this works for dual channel Fender amps and for the similar dual channel F-2B. I would only be guessing as to whether jumpering works between two separate single channel preamps, like the F-1X. I suspect it would, but I'm sure there is someone around here who could give more accurate advice in this area than me.

Bill, tgo

StephenR · « **Reply #18 on:** July 19, 2015, 07:38:41 PM »

If you are using two F-1Xs you could also connect the effects send of the first preamp to the input of the second preamp, run each to a separate side of your power amp then each side to a cabinet of your choice.

pace · « **Reply #19 on:** July 20, 2015, 05:55:21 AM »

Bill, when I'm not running stereo, I plug into A, run a jumper out of the second input jack to a microverb, or holy grail, then plug that into channel B. All my stereo connections out the back stay the same....

lbpesq · « **Reply #20 on:** July 20, 2015, 08:14:35 AM »

Mike:

So you are playing with reverb on one side and dry on the other?

Bill, tgo