Hi all,
I recently picked-up a 2008 SCD with front laser and side LEDs (both in blue). The lasers are fine but I've had a few problems with the side LEDs. The toggle switch that activates the lights is a 3 way unit - first position is off, second position is side LEDs only, and third position is side lights and front lasers. When activating the side LEDs one of two problems occurs: either just the first five (frets 3,5,7,9 and 12) lights illuminate; or, all lights illuminate but extremely dimly (not really visible if there's any natural or room lighting in play). I had the Gallery (London) take a look and the situation was resolved for around a week. Unfortunately, it's now returned. In position three, the lasers are illuminated faultlessly, however, the problem with the side LEDs remains (either just 5 of the 10 LEDs illuminate, or all come on very dimly). I've tried the usual fix (activate the switch 50 times or more etc.) but with no resolution of the problem.
Any advice or observations would be gratefully received, it's not a major problem but frustrating nonetheless. Moreso as it's really the side LEDs that get most use (the lasers are super bright!)
Thanks and very best wishes, Loz