Author Topic: Slapping on an alembic  (Read 218 times)

mascarasnake

  • club
  • Junior Member
  • *
  • Posts: 10
Slapping on an alembic
« on: June 23, 2006, 04:11:43 PM »
Can it be done?  From what I see all of the necks are set necks and neckthrus, and usually bolt-ons tend to be better for the percussive quality.

dadabass2001

  • club
  • Senior Member
  • *
  • Posts: 1816
  • Are 3 Alembics enough? NO!
Slapping on an alembic
« Reply #1 on: June 23, 2006, 04:39:14 PM »
Hello Bill,
Well, Stanley Clarke seemed okay with Alembic neck thru models....
 
and Louis Johnson of The Brothers Johnson...
 
Check the Artists & Their Alembics thread
 
Mike
"The Secret of Life is enjoying the passage of Time"
 - James Taylor

lidon2001

  • club
  • Senior Member
  • *
  • Posts: 608
Slapping on an alembic
« Reply #2 on: June 23, 2006, 05:18:45 PM »
Stanley Clarke and Mark King, two Alembic Signature models are named after slap monsters.  Yes, you can slap an Alembic.  The better percussive quality is in Alembic's corner, IMHO.
 
T
2005 MK Deluxe SSB, 2006 Custom Amboyna Essence MSB, Commissioned Featured Custom Pele

lidon2001

  • club
  • Senior Member
  • *
  • Posts: 608
Slapping on an alembic
« Reply #3 on: June 23, 2006, 05:32:13 PM »
In addition, I want to add that after playing my new Alembics, I can't even think of going to  a Franken-bass (bass with bolts in the neck) such as my amazing '83 USA Vintage Reissue Jazz.  It really can't hold a note against my Alembics.  The Fender just needs to age a few more years before I sell it.
 
My Alembics can be slapped just fine.  And most players could slap them better than me!  
 
T
2005 MK Deluxe SSB, 2006 Custom Amboyna Essence MSB, Commissioned Featured Custom Pele

bigredbass

  • club
  • Senior Member
  • *
  • Posts: 3032
Slapping on an alembic
« Reply #4 on: June 23, 2006, 06:30:53 PM »
Bolt-ons are better for bolt manufacturers.
 
J o e y

olieoliver

  • club
  • Senior Member
  • *
  • Posts: 2747
Slapping on an alembic
« Reply #5 on: June 23, 2006, 07:19:39 PM »
Well lets see here. I have several bolt on basses and several neck thru models and can slap them all just fine.  
   I will admit that on my Alembics I had to clean up my slapping some. I credit this to the Alembics superior quality in sound. On my Alembic basses I have to raise my palm up a tad to keep it from hitting the strings. In other words, nothing gets by the Alembic. It is a much more sensitive instrument than the average bass.
  It's like the first time you sing with an in ear monitor, or sing in a studio with headphones. You can really hear everything, mistakes in all.

hankster

  • club
  • Senior Member
  • *
  • Posts: 1401
Slapping on an alembic
« Reply #6 on: June 24, 2006, 04:18:01 AM »
You can not only slap on an Alembic, you can get every nuanced slap sound ever recorded.  It requires a bit more right hand precision (at least on my Stanley Clarke model) than some other basses but once you are used to it there is no going back.
 
Rick
Live each day like your hair is on fire.

pauldo

  • club
  • Senior Member
  • *
  • Posts: 4901
  • What chaos . . . ?
Slapping on an alembic
« Reply #7 on: June 24, 2006, 06:17:05 AM »
Hankster speaks the truth, on my Distillate (when strung with round wounds) I can dig in really hard with  my right hand doing fingerstyle and get the precussive 'slap' sound, which I have seen Stanley do also.

worldfamousandy

  • club
  • Member
  • *
  • Posts: 135
Slapping on an alembic
« Reply #8 on: June 25, 2006, 04:54:08 AM »
I love the sound of the Alembic being slapped.  High fidelity definitely lends itself well to the technique.  I do occasionally struggle with finding enough room between the neck pickup and the neck, however.  You have to be precise with that right hand!  Also, if you really start to go nuts, you risk slapping the pickup selector switch.  That can be painful (I once actually drew blood from one of these accidents).  I play a '76 Series 1, and I believe the newer ones feature a repositioned selector switch.
 
Andy Calder
www.andycalderbass.com

palembic

  • club
  • Senior Member
  • *
  • Posts: 2186
Slapping on an alembic
« Reply #9 on: June 25, 2006, 08:49:07 AM »
Slapping on an Alembic has it's own peticular sound I guess.
An Alembic through-neck is very responsive to brights and lows as I read somewhere written by Mica.
 
Paul TBO
 
I see that the contingent Pauls is steadily growing!
***Sigh*** ....it's great to be a Paul!

wideload

  • club
  • Advanced Member
  • *
  • Posts: 214
Slapping on an alembic
« Reply #10 on: June 25, 2006, 04:46:06 PM »
YOU BRUTES!
Alembics are to be caressed gently with the fingers, not beaten like common basses. I beg you, seek help!
 
Larry

keavin

  • club
  • Senior Member
  • *
  • Posts: 1657
Slapping on an alembic
« Reply #11 on: June 27, 2006, 08:23:00 AM »
I slap the sh!t outta my Alembic cause when it Cries everybody can hear it & that's what it likes!

apdavis

  • club
  • Member
  • *
  • Posts: 106
Slapping on an alembic
« Reply #12 on: June 27, 2006, 11:49:12 AM »
Trip Wamsley does an awesome job incorporating slap into his writing,  Very worthy of a listen.
http://www.tripwamsley.com/news.htm
http://www.tripwamsley.com/totma.htm

jacko

  • club
  • Senior Member
  • *
  • Posts: 4068
Slapping on an alembic
« Reply #13 on: June 27, 2006, 02:49:39 PM »
And he's a really nice guy to chat with aswell.
 
graeme