Author Topic: Post Sound Samples (Read 161 times)

maclamb · « **on:** March 08, 2007, 08:12:11 AM »

Being a noob it would really help me to hear samples of what people refer to:growl, tone, mid range, low end, effects of a low pass filter, etc.
Perhaps this has been done to death...perhaps not.

How about a common format for post:
mp3 file (upload as attachment...will this work here?)
Bass:
Neck:
NeckType:
Body:
Frets:
Fingerboard:
Bridge:
NeckPU:
MiddlePU:
EQ/Tone controls

This might serve us to give us a common reference point for discussions, etc.
Plus if someone can test and post frequency - imagine how much we could learn!

maclamb · « **Reply #1 on:** March 08, 2007, 12:56:24 PM »

I tried to upload my sample, but the 150K limit will make uploading samples an issue.
I am willing to take samples and post them on my web site, if ya'll want to do this.

keavin · « **Reply #2 on:** March 09, 2007, 05:13:39 AM »

Here's a sample of my series bass***** http://www.vmusicians.com/kbarnes/

FC Bass · « **Reply #3 on:** March 09, 2007, 05:45:45 AM »

The Fog

Bass: '87 Spoiler
Neck: 3 piece Maple
NeckType: Neck Through body
Body: Mahogany with Coco Bolo or Bocate top
Fingerboard: Ebony
BridgePU: AXY, on
NeckPU: AXY, on
MiddlePU: N/A
EQ/Tone controls: Filter at 3/4 through a Digitech BP-8, intro = 2 tracks, one with an extreme phaser. Also used the Jazz bass for the low B where the guitar solo begins.

Weird stuff

Bass: Same Alembic as above (could be the '83 though, I don't remember...anyway, the specs are almost the same. Solid Koa body on the '83) Main riff = a Fender Jazz Bass V (1996 Anniversary ltd edition)
Neck: one piece Maple
NeckType: Bold on
Body: Alder with Flame Maple top + back
Fingerboard: Pao Ferro
BridgePU: Fender Jazz V, on
NeckPU: Fender Jazz V, on
MiddlePU: N/A
EQ/Tone controls: too long ago to remember :-)

Sorry for these crappy recordings :-)

maclamb · « **Reply #4 on:** March 09, 2007, 06:48:17 AM »

Thanks FC - that's a start.
Keavin - was there a sound sample on your page that I missed?

maclamb · « **Reply #5 on:** March 09, 2007, 06:49:57 AM »

oops - found it - thanks

David Houck · « **Reply #6 on:** March 09, 2007, 05:50:02 PM »

In answer to your question; no, you can't upload sound files to the board. Most folks here have sound files on other servers and link to them.

FC Bass · « **Reply #7 on:** June 15, 2007, 10:47:31 PM »

One by Metallica and FC Spoiler

Bass: '83 Spoiler
Neck: 3 piece Maple
NeckType: Neck Through body
Body: Solid Koa
Fingerboard: Ebony
BridgePU: AXY, on
NeckPU: AXY, on
MiddlePU: N/A
EQ/Tone controls: Filter at 3/4 Through Zoom 505 into my Laptop

Jason/Cliff Burton bass solo

Bass: '83 Spoiler
Neck: 3 piece Maple
NeckType: Neck Through body
Body: Solid Koa
Fingerboard: Ebony
BridgePU: AXY, on
NeckPU: AXY, on
MiddlePU: N/A
EQ/Tone controls: Filter at 3/4 through Mesa stack with Morley PWB and E-H Little Big Muff. Recorded with DI and Vocal/drum mics also picked some up.

Lost

Bass: '87 Spoiler
Neck: 3 piece Maple
NeckType: Neck Through body
Body: Mahogany with Coco Bolo or Bocate top
Fingerboard: Ebony
BridgePU: AXY, on
NeckPU: AXY, on
MiddlePU: N/A
EQ/Tone controls: Filter at 3/4 through a Digitech BP-8

Jason Newsted solo

Bass: '91 Fender Prodigy with Alembic Activators
Neck: Maple
NeckType: Bolt on
Body: Poplar
Fingerboard: Rosewood
BridgePU: Alembic J, on
NeckPU: Alembic P, on
MiddlePU: N/A
EQ/Tone controls: Filter at 3/4 Through Zoom 505 into my Laptop

The same Jason Newsted solo

Bass: '83 Spoiler
Neck: 3 piece Maple
NeckType: Neck Through body
Body: Solid Koa
Fingerboard: Ebony
BridgePU: AXY, on
NeckPU: AXY, on
MiddlePU: N/A
EQ/Tone controls: Filter at 3/4 Through Zoom 505 into my Laptop

I forgot to mention: I always play with Q switch on ;-)

bonesrad · « **Reply #8 on:** June 30, 2007, 05:45:51 PM »

Here are a few songs using my Europa 5 w/ Series I.

http://www.3dbdown.com/multimedia.php

Bones

dannobasso · « **Reply #9 on:** June 30, 2007, 09:10:07 PM »

You could buy my cd Down Below by Doomtree. Lots of samples there.
02 excel 5
5pc maple walnut pinstripe
set neck
alder w flame maple
pau ferro
dual fatboys
all tone vol full up
f1x-sf2-plx3402-acme low b2 miked and direct from f1x into protools mixed at Grandmaster Studio Hollywood by Doomtree and Andrew Alekiel through a vintage Neve 8028 console. The last all Class A console Neve ever built.

markrc1964 · « **Reply #10 on:** July 01, 2007, 05:53:25 AM »

Hi, it's Alembic, trust me it will do what you want...Mark

olieoliver · « **Reply #11 on:** July 01, 2007, 02:11:42 PM »

Tell me where and how Danno, I'd like to have a copy.

Olie

precarius · « **Reply #12 on:** July 01, 2007, 02:31:37 PM »

Me too! Post a website where it is available for purchase. Maybe there should be a section in the forum where Alembic club members could post there commercially available CD'S and DVD'S. I ordered the Apache Indian DVD and I would love to get the Doomtree CD also.
Mike

David Houck · « **Reply #13 on:** July 01, 2007, 06:05:50 PM »

You can get the Doomtree CD at Amazon.com

dannobasso · « **Reply #14 on:** July 02, 2007, 07:03:13 AM »

You are all too kind! Its also available at Best Buy, Virgin, FYE and other retailers. We are distributed by Koch so any local shop can order it. As Dave so kindly posted, Amazon, CD now, Ebay etc. Careful that an ebay one is not a demo. The full version has some video of rehearsals and recording/mixing. Thanks in advance!

Author Topic: Post Sound Samples (Read 161 times)

maclamb

maclamb

maclamb

maclamb