Straplocks

[jet_powers]

The only time I have a problem with the Schallers is when using my Exploiter. The rounded thingy you grab to release it sticks into my gut. So I just remove it when playing that bass....
 
JP

[jacko]

Sam. Smaller strap holes are a blessing with the Schallers. It means, with a bit of effort, you can screw the threaded post into the strap before fastening the nut on. Gives a little extra security - I'm using Levy's straps. So far I've never had a nut loosen but I've taken the precaution of adding a drop of glue to the screws on the basses.  
 
Graeme

[bracheen]

You are right with that, Graeme. I use Planet Waves except on my Thumb Bass.  I use a Comfort Strapp to counteract the neck dive.  I've had no problems with nuts loosening either.  Of course my basses don't go through the rigors of gigging.  
 
Sam

[82daion]

I've used Schallers for some time, and have always had good luck with them, as long as I make sure the nuts on the strap pieces are tight.
 
I've got a set waiting for my Series I when it comes in.

[haddimudd]

Valentino, thanks for that link!
 
I have regular problems with the Schallers on my doubleneck. Maybe they can't handle the extra weight?  
 
The problem in my case lies not with screws or nuts but the locking parts:  
 
When the strap pulls, it usually orients the lock into a position in which the opening of the slide turns to face downwards, towards where the bass will be able to escape. Only a bit of extra weight/pulling is required and the lock will slide off its counterpart. It seems like the two connecting parts don't have a sufficiently tight grip at each other. I can't see any adjustments for that particular issue.  
 
I wish they would not slide on sideways but rather connect from the front. It seems like the Zeppelinn version works that way. I am curious to check them out...
 
Hartmut

[Bradley Young]

Hartmut,
 
I installed a pair last night.  I think that you will like them-- they are very sturdy, and definitely seem failsafe.  I spent some time fiddling with them, and they have a very satisfying click when they seat.
 
One thing, though-- I would not suggest installing them with the screws that they come with (they are substandard).  Install them with the Alembic screws (like everything Alembic, they're over-spec'd).  You will need to trim some of the head to make them fit, but well worth the hassle.
 
I did mine with a disc sander attached to my drill.  Took just a couple of minutes.
 
If I remember, I'll try to post some pictures of them installed on the Epic.

[Bradley Young]

Pictures:  

 

  Bradley