Author Topic: series 1 not playing with special cable  (Read 809 times)

Mlazarus

  • Advanced Member
  • ****
  • Posts: 378
  • 1982 Series 1 owner
series 1 not playing with special cable
« on: December 14, 2022, 06:41:43 PM »
As you all know, when the batteries of the series 1 dies, it should not matter because all you need to use is the special stereo-to-mono cable.
Only the front pickup will work in that case. Correct? Well, it's not happening. I'm sure the battery died, but that is when the special cable
 is used. What do you think is happening?
LazArt3D

lbpesq

  • club
  • Senior Member
  • *
  • Posts: 10683
Re: series 1 not playing with special cable
« Reply #1 on: December 14, 2022, 06:48:56 PM »
By “special cable” are you referring to the 5-pin cable that plugs into the power supply, or a standard cable with a stereo TRS 1/4” plug on one end, and two 1/4” mono plugs on the other?   Are you using the power supply?

Bill, tgo

StephenR

  • club
  • Senior Member
  • *
  • Posts: 1744
    • CRYPTICAL
Re: series 1 not playing with special cable
« Reply #2 on: December 14, 2022, 06:53:50 PM »
Hi Michael... if the batteries are dead the only way to use the bass is with the DS-5 external power supply and five-pin cable... or, replace the batteries. :)

rv_bass

  • club
  • Senior Member
  • *
  • Posts: 4382
Re: series 1 not playing with special cable
« Reply #3 on: December 14, 2022, 06:54:04 PM »
Deleted…Stephen beat me to it :)

Mlazarus

  • Advanced Member
  • ****
  • Posts: 378
  • 1982 Series 1 owner
Re: series 1 not playing with special cable
« Reply #4 on: December 14, 2022, 08:09:15 PM »
This cable is a 1/4 stereo to 1/4 mono. The stereo end goes into the bass and the mono end into the amp I SWEAR I was able to play the bass with this cable and ONLY the rear pickup without batteries. Some of the non 5 pin Alembic models don't have to deal with this because they are common 1/4 jack mono basses.
LazArt3D

Mlazarus

  • Advanced Member
  • ****
  • Posts: 378
  • 1982 Series 1 owner
Re: series 1 not playing with special cable
« Reply #5 on: December 14, 2022, 08:14:14 PM »
lbpesq, i was not using the power supply. Typically, on Gigs mainly, but in my room I'm too lazy to connect it so i just use the battery mode. I have rechargeable 850Mah 9v. I swear the bass can play without batteries with the 1/4 mono to 1/4 stereo for the rear front pickup. My 80's Distillate didn't have this problem because if was 1/4 mono jack only.
LazArt3D

lbpesq

  • club
  • Senior Member
  • *
  • Posts: 10683
Re: series 1 not playing with special cable
« Reply #6 on: December 14, 2022, 09:38:05 PM »
A Series instrument needs power, either from batteries, or with the 5-pin cable and power supply.  No power, no sound.

Bill, tgo

mica

  • alembic
  • Senior Member
  • *
  • Posts: 10595
Re: series 1 not playing with special cable
« Reply #7 on: December 14, 2022, 10:29:39 PM »
Bill is correct, all Alembic instruments require power - either from batteries or the 5-pin.

Mlazarus

  • Advanced Member
  • ****
  • Posts: 378
  • 1982 Series 1 owner
Re: series 1 not playing with special cable
« Reply #8 on: December 14, 2022, 10:54:39 PM »
 All series basses need power got ya. My 80s Distillate didn't need batteries. Thanks again.
LazArt3D

jazzyvee

  • club
  • Senior Member
  • *
  • Posts: 8701
  • Bass, Guitar, Preamps.
Re: series 1 not playing with special cable
« Reply #9 on: December 15, 2022, 06:15:11 AM »
For me, the batteries in a series bass are for backup purposes only. So far i haven't used them on a gig, and hardly at home but on a gig i generally have a spare jack lead just in case i need it. I do wonder if there is any difference in performance of the electronics and sound quality between D-S5 and batteries.
« Last Edit: December 15, 2022, 06:16:51 AM by jazzyvee »
The sound of Alembic is medicine for the soul!
http://www.alembic.com/info/fc_ktwins.html

lbpesq

  • club
  • Senior Member
  • *
  • Posts: 10683
Re: series 1 not playing with special cable
« Reply #10 on: December 15, 2022, 08:16:07 AM »
All series basses need power got ya. My 80s Distillate didn't need batteries. Thanks again.

Michael, if your Distillate didn’t need batteries, the active Alembic electronics would have had to have been replaced with a non-Alembic passive system.

Bill, tgo

mica

  • alembic
  • Senior Member
  • *
  • Posts: 10595
Re: series 1 not playing with special cable
« Reply #11 on: December 15, 2022, 08:28:03 AM »
Active electronics = needs power source.

All we do is active, all Alembics require power sources.

Bill, I think you may have cracked the code there - if the original electronics were replaced they may have been passive and not required a battery.

Mlazarus

  • Advanced Member
  • ****
  • Posts: 378
  • 1982 Series 1 owner
Re: series 1 not playing with special cable
« Reply #12 on: December 15, 2022, 06:33:41 PM »
I dont remember if the distillate had a battery plate on the back. It's been 25 now.
LazArt3D

Mlazarus

  • Advanced Member
  • ****
  • Posts: 378
  • 1982 Series 1 owner
Re: series 1 not playing with special cable
« Reply #13 on: December 15, 2022, 06:37:15 PM »
This is my (part of it) 80's Distillate. Did this have a battery plate on the back Mica? I don't remember. Nice flat sawn zebra wood BTY. Lol.
LazArt3D

mica

  • alembic
  • Senior Member
  • *
  • Posts: 10595
Re: series 1 not playing with special cable
« Reply #14 on: December 15, 2022, 07:31:34 PM »
Distillates had one large plate with the electronics and the battery contained.