Author Topic: Sound equipment in the NY/Ct area (Read 1110 times)

jacko · « **Reply #60 on:** May 24, 2007, 07:47:51 AM »

jeff.
Whatever you do, don't go for the Behringer tuner. i had one and it didn't see the low B and was pretty flaky with the E string aswell. Mike pisanek had the same problem so it wasn't an isolated incident. That's why i went for the Korg - works perfectly. I've not heard anything good about behringer from anyone - mostly regrets that they didn't save a little extra and buy something that actually works.

Graeme

flaxattack · « **Reply #61 on:** May 24, 2007, 07:50:23 AM »

beaver is holding a used 1602 for 499
500 watts-4ohms
bridged 1600
i think that should be enough

rraymond · « **Reply #62 on:** May 24, 2007, 08:33:24 AM »

You don't go.

keith_h · « **Reply #63 on:** May 24, 2007, 08:42:03 AM »

The 1602 is a good amp. I use one for PA monitors and sometimes bridged for the mains. The price appears to be inline with the current used prices.

Keith

flaxattack · « **Reply #64 on:** May 24, 2007, 08:44:33 AM »

there is one on ebay ending in 8hrs at 299 currently
thanks keith much appreciated

bsee · « **Reply #65 on:** May 24, 2007, 10:51:12 AM »

$400 has been the typical target for a used 1602, $500 for a 2402.

rraymond · « **Reply #66 on:** May 24, 2007, 04:59:26 PM »

Flax, did you score the 1602 on ebay? I'm with Keith and think it will serve you well.

BTW, I have one piece of Behringer gear that has never let me down. I have their PX 2000 UltraPatch Pro patch bay. Of course, I set it up in my studio and haven't changed anything since, so I haven't exceeded the 10 insertions limit on the contact points! LOL

Good luck!

flaxattack · « **Reply #67 on:** May 24, 2007, 06:16:33 PM »

no
it went for 340 w.shipping
beaver offered my 499 with a 4 mount rack case
6 of 1 1.2 of the other
something goes wrong and i have recourse
thanks

rraymond · « **Reply #68 on:** May 24, 2007, 07:04:25 PM »

Bummer. But, what the heck, $499 with a 4 space rack ain't too bad. You'll want one.

When you get this system up and running, you'll have to get us a report - after you've got it broken in, or course. For an EUB I've got a Zeta Crossover upright which sounds great through my B2, I really want to hear your opinions on the Classico!

flaxattack · « **Reply #69 on:** June 12, 2007, 09:20:47 PM »

hey thanks to all for your help and guidance
thanks also to dannobasso........he was really helpful in advice and let me test drive his cabs. as much as i wanted the B4 i think its a tad much right now
so here is what i ended up with
qsc 1602
alembic f1-x
kort dtr-1000 tuner
acme low b2- courtesy of dan
epifani 1x15 courtesy of dan
dan has an awesome collection of alembics- blew my mind,,,, esp the 7 string...]
dan got a chance to noodle on wolf- was his first time on a balance k and he loved the feel of the ti's i went back to... nothing feels like ti flats..

dannobasso · « **Reply #70 on:** June 13, 2007, 12:32:24 PM »

Flax you sould have a great rig for most any situation. I ran 10'sand 15's for years. I know that some at Alembic are partial to the 15's. So you have the best of those 2 worlds. Interesting thing, I used the B4 cab with the F1X SF2 3402 set up in a studio after they found it difficult to mic up the whappo jr. Track was a combo of miced cab, sansamp di and groovetubes tube di. So I can now say the B4 was out of the house once. Catch up with you later in the week for the epi.