Author Topic: Wanted IN2 (Read 1253 times)

slawie · « **on:** October 29, 2010, 05:22:01 PM »

I am on th elookout for an IN2.
Please email me if you have one that you are willing to part with.
I am looking particularly for a 240V model but
I most likely will be able to upgrade the voltage myself from 110V.
Thanks

slawie

jseitang · « **Reply #1 on:** November 04, 2010, 01:33:18 PM »

well i have one that i bought last year from oliver(thanks oliver) and i know alembic has plans on reviving some from repro. sit tight, and im sure something will transpire.

slawie · « **Reply #2 on:** November 04, 2010, 02:26:04 PM »

Thanks for the information Jimy.

I guess I will have to wait.

slawie

slawie · « **Reply #3 on:** January 20, 2011, 05:41:05 PM »

I guess there is not that much movement of IN2's
Maybe a way around it is to install a DI into my F-2B?
Could the DI parts from a F-1X be retrofitted
as a kit into the F-2B?
This looks like a question that Mica may be able to answer.
Any elegant solutions?

slawie

sonicus · « **Reply #4 on:** January 20, 2011, 06:15:31 PM »

Clear your mind of everything else and think of Nothing!
Next, Think ; IN2____IN2____IN2____IN2____
I would like one as well ________

FC Bass · « **Reply #5 on:** January 20, 2011, 08:51:08 PM »

If I'm not mistaken I saw one @ Edwin van Huik's Bass connection

slawie · « **Reply #6 on:** January 20, 2011, 09:08:26 PM »

Flip I cannot see it!!!!!!!

slawie

slawie · « **Reply #7 on:** January 21, 2011, 12:31:26 AM »

I emailed and they replied promptly.
They do not have one.

The search continues......

slawie

adriaan · « **Reply #8 on:** January 21, 2011, 02:15:32 AM »

IIRC, Edwin has a DR-5 with two XLR inputs in his shop, but it's his personal equipment.

The last time we saw an IN-2 (and there are precious little sightings) it changed hands between members senmen and jseitang.

FC Bass · « **Reply #9 on:** January 21, 2011, 08:28:55 AM »

Must have been that double DR-5 then...

Sorry, just caught a glimpse of it before I was distracted and immediately preoccupied by one of the mothership's creations from last year. (about six weeks ago)

Good luck with yer search!

jseitang · « **Reply #10 on:** January 21, 2011, 03:05:05 PM »

slawie-
yes the last time an in-2 showed its face was when senmen sold it to me.

that said,i sent the in-2 to alembic to give it a tune up and conversed into 120v and inspection
its still at alembic.
now there has been a lot of talk about the in-2 repro's- i know because ive talked to mica at length about this project. its slated to be done.
things take time. esp when they are done with the upmost care and quality. these things take time. ive waited on the in-2 in the market for years. not to worry! mica has told me before, it will take some time. they are a family business. trust me, you wont be dissapointed.
as far your DI solution, there are members that have modded their preamps to allow di connections.
im not sure where in the club site tho.

slawie · « **Reply #11 on:** January 21, 2011, 04:33:06 PM »

Yes Adriaan I saw that also after a search happened back in 2008.
Thanks Jimy you lucky son-of-a-gun!
If you ever think of parting with it keep me in mind. If you wouldn't mind
I will buy the parts taken off that are discarded in the conversion.

Thanks everyone for helping in my quest for the holy grail.

waiting, waiting, waiting, waiting, waiting, waiting, waiting, waiting, waiting, waiting, et cetera

slawie

jseitang · « **Reply #12 on:** January 21, 2011, 04:49:03 PM »

no i wouldnt mind......but then again, good things come to those who wait....

slawie · « **Reply #13 on:** January 21, 2011, 05:04:42 PM »

Hey Jimy,

You are a good man! I owe you many beers.

I just had a look at the number of posts we have both done.

I'll race you to senior membership

slawie · « **Reply #14 on:** February 17, 2011, 06:12:59 PM »