Author Topic: Re: (x) 04C13314 (Read 227 times)

charles_holmes · « **on:** April 22, 2009, 06:32:56 PM »

Ok, I read everything Mica as far as how to ask for the build request. Can you send the build request. This is my 4th request but this time I started with the serial number (duhhhh). I asked about 2 yrs ago when I initially got my Distillate, but I assume you got even more busy and forgot about me, (things happens)
Chalie Holmes

chalie_holmes · « **Reply #1 on:** March 20, 2009, 08:24:46 AM »

Hey Mica,
2 yrs ago my wife bought an Alembic for me for Christmas. This magnificent bass was purchased from Bass Northwest. It has the body of a Distillate and it is a Short Scale series I. The serial number is 04C13314.
Thank you so much for your help.
Chalie Holmes.

charles_holmes · « **Reply #2 on:** April 12, 2009, 09:33:15 PM »

lidon2001 · « **Reply #3 on:** April 12, 2009, 10:45:16 PM »

Probably this Adam creation:

http://club.alembic.com/Images/631/8768.html?1093510715

David Houck · « **Reply #4 on:** April 14, 2009, 07:59:13 PM »

I think you're right Tom.

chalie_holmes · « **Reply #5 on:** April 15, 2009, 05:34:36 AM »

Hey Tom!
Thank you so much!!!!!!!!!!
That's me goil!!
I did not want to post another build request since I was to stupid to read that I should include the serial # for the introduction.You have made my day!!! Kudos to ya!
Thank you soooooo much!

mica · « **Reply #6 on:** August 10, 2010, 04:27:31 PM »

You've seen the build for your bass. Here's what's in the file:

top: Vermilion
accent: no accent laminate
body: Ash
neck: Mahogany, Maple, Walnut (graphite rod between truss rods)
scale: 30.75 short
fingerboard: Ebony
inlays: mother of pearl ovals
peghead shape: Crown
body shape: Distillate
pickups: SC-1 + HX
controls: Series I vol x2, filter x2, Q-switch x2, pickup selector switch, mono 1/4 output, stereo 5-pin output
finish: polyester satin
tuners: chrome Gotohs
straplocks: chrome
hardware: brass
notes: slightly thinner top to show a little more core from the front view. pickup selector on lower horn on brass plate, bass pickup close to end of fingerboard.
originally made for: Bass Northwest as a custom order
birthday: July 30, 2004

mica · « **Reply #7 on:** August 10, 2010, 04:31:07 PM »

Forgot to add that Bass Northwest bought a new power supply and cord in December of 2007 for the bass.

charles_holmes · « **Reply #8 on:** August 10, 2010, 08:25:29 PM »

Hey Mica,
Thank you for answering me!
I know you have been uber-busy! Tom gave me the link to my Distillate, I love this axe! I humbly extend my gratitude, and appreciation to the Alembic family for building such a magnificent bass! I still have to spank it though!(hee hee!)
Chalie Holmes