Author Topic: (x) 89H5430 Elan (Read 295 times)

artswork99 · « **on:** December 12, 2008, 09:51:16 AM »

Mica,
May I please have the build information on Elan 89H5430 if it is available.
Thank you kindly,
Art

precarius · « **Reply #1 on:** December 15, 2008, 04:44:11 PM »

Art- Congratulations on your new bass. I tried to get it myself. Post pix.
Mike

artswork99 · « **Reply #2 on:** December 16, 2008, 05:38:11 AM »

Thanks Mike.

artswork99 · « **Reply #3 on:** February 10, 2009, 07:27:05 PM »

Bump for a lookup. Thanks

Whoops... I bumped because I saw Feb dates and just realized that these were 2008... sorry.

(Message edited by artswork99 on February 10, 2009)

mica · « **Reply #4 on:** July 09, 2009, 08:09:41 PM »

Hi Art,

Wow, you've been waiting! At least I did locate your file and found something for you to learn:

HLB4 Elan 4-string bass
top: Figured Walnut
accent: none recorded (and probably none there)
body: Maple
neck: 3-piece Maple
scale: 34 (long)
fingerboard: Ebony
inlays: Pearloid (plastic) ovals
pickups: Alembic PJZ
controls: I'm a little confused on this one. It says AE-1, Q, pan which has the same controls and an Elan, but it's not actually the same circuit. If you post an image of the electronics cavity, I can resolve this ambiguity.
birthday: June 20, 1989
originally made for: Massimino Music

The original owner registered in January 1990 from Michigan.

artswork99 · « **Reply #5 on:** July 10, 2009, 06:14:25 AM »

Thank you Mica!
Requested cavity picture below

When I purchased the bass the previous owner said that Alembic had sent a replacement for the Pan potentiometer (marked 475-024). The bass sounds great and the controls work perfectly!
Regards,
Art

mica · « **Reply #6 on:** July 10, 2009, 05:14:09 PM »

It appears to have a full-on set of Elan electronics, so I'm not sure about that ambiguity in the records, but I've made an entry to clarify it. Thanks!

artswork99 · « **Reply #7 on:** July 10, 2009, 05:20:48 PM »

Thank you Mica. Have a great weekend, Art

chitownmatt · « **Reply #8 on:** March 05, 2010, 06:23:25 AM »

Art, I have an 89' with the same electronics.
Have you even noticed a difference in the output of the neck and bridge pickup when the pots are both fully open and the pan is centered? My neck pick-up seems to be drastically lower.
I don't know if this is normal or if it is a problem with p/u or circuit.
Thanks.

mica · « **Reply #9 on:** March 05, 2010, 09:44:42 AM »

There should be difference in volume when both trimmers are full up due to the physical location of the pickups, but generally it's the treble (bridge) pickup that has the lower output.

If your neck pickup height is very low, it could account for some of the difference.

The picture in this post for the Europa has the same trim pot positions as the Elan:
http://club.alembic.com/Images/16271/24781.html?1139017200

If you reverse where the pickups are plugged in, you can determine if there is a problem with a pickup or the circuit, or it may reveal no problem.

artswork99 · « **Reply #10 on:** March 05, 2010, 01:56:31 PM »

Thanks Mica! In Matt's other thread I too suggested the flipping of the connectors

(Message edited by artswork99 on March 05, 2010)