Author Topic: PF-6 circuit trouble ? (Read 606 times)

mica · « **Reply #15 on:** June 16, 2009, 06:50:57 PM »

Do you mean the mounting standoffs:

You can test the function without mounting the board if you have a board that lacks these parts. When you send your card in, send Toshiaki's card too and we'll mount the standoffs - these are pressed in and need a special tool to do properly.

to_81_0190 · « **Reply #16 on:** June 17, 2009, 01:31:46 AM »

I've got small parts for installing with spare PF-6 card. They are screws,nuts,spacers and washers. I forgot to include them with the card when shipping. I shipped them to Eiji already.

Toshiaki

(Message edited by to 81 0190 on June 17, 2009)

room037 · « **Reply #17 on:** June 17, 2009, 06:57:30 AM »

Hi Mica,

Thank you for your reply.
Yes, I ask about the standoffs.
Now I am waiting for the parts from Toshiaki.
I will try to fit them, and report to here.

Many thanks, Toshiaki !
I wish to meet again with my SSB.

Eiji

room037 · « **Reply #18 on:** June 18, 2009, 09:04:35 AM »

Now I got the parts from Toshiaki, and I did setup for 75-145.

These are working fine, and sound is OK.

I will send PF-6 card within the few days.

Eiji

David Houck · « **Reply #19 on:** June 18, 2009, 10:17:32 AM »

Cool!

to_81_0190 · « **Reply #20 on:** June 18, 2009, 03:46:25 PM »

You are welcome Eiji. I'm looking forward to meet you agin.

Toshiaki

mica · « **Reply #21 on:** July 13, 2009, 03:19:39 PM »

OK - new connectors attached, all nice and clean:

One of the gains was set very low, so that could also contribute to the low output. There were no other problems found with the board, so we'll make the arrangements to send it back to you this week.

artswork99 · « **Reply #22 on:** July 13, 2009, 03:23:16 PM »

Such nice work!

room037 · « **Reply #23 on:** July 13, 2009, 03:40:23 PM »

Hi Mica,

Thank you for the info.
I am waiting for the PF-6, and I will upload when I get it.

Eiji

room037 · « **Reply #24 on:** August 04, 2009, 08:21:43 AM »

Hi Mica,

Today I got my PF-6 and installed it.
Everythings are fine !

Thank you for the work and all advices.

Eiji

David Houck · « **Reply #25 on:** August 09, 2009, 12:38:46 PM »

That's great to hear Eiji!