Author Topic: Spoiler 4 string fretless  (Read 159 times)

ohbob

  • club
  • I'm New Here
  • *
  • Posts: 9
Spoiler 4 string fretless
« on: December 26, 2011, 07:50:45 PM »
When I set my low pass filter to certain positions my bass sounds like it is running through an envelop follower (sort of wha sound). Also the filter pot is not tapered well. At about a quarter turn it is full off/on. Help!
 
(Message edited by ohbob on December 26, 2011)

terryc

  • club
  • Senior Member
  • *
  • Posts: 2488
Spoiler 4 string fretless
« Reply #1 on: December 27, 2011, 03:14:26 AM »
Have you adjusted the pre set pots in the control cavity?? Also it sounds as if you have the Q switch permanently in the on position.
I am sure others here will advise soon

mica

  • alembic
  • Senior Member
  • *
  • Posts: 10595
Spoiler 4 string fretless
« Reply #2 on: December 27, 2011, 02:13:16 PM »
If your electronics haven't received an electronics upgrade, consider sending them in for this relatively inexpensive service. The whole of the electronics' function is tested at the same time. Make sure you include your detailed observations when you send them in, so that we can work to recreate them here and confirm repair.  
 
You can email me (click on my user name on the left) to schedule servicing.

ohbob

  • club
  • I'm New Here
  • *
  • Posts: 9
Spoiler 4 string fretless
« Reply #3 on: December 27, 2011, 05:32:38 PM »
I'll try adjustments in the control cavity but, I thought that was just for pickup volume. Thanks for the input. Thank you for the reply Mica I will consider that if I can't figure it out.

mica

  • alembic
  • Senior Member
  • *
  • Posts: 10595
Spoiler 4 string fretless
« Reply #4 on: December 27, 2011, 05:36:27 PM »
The trimpots on the inside are for gain only.  
 
Have you had your Spoiler since 1987? If you haven't used it much, or it was recently acquired, you should clean the pots bu rotating 20-40 times, making sure to reach the stop on both ends.