Bill; I have a question.
On the front, each processor has three knobs; and the knobs have lines on them, presumably to tell where you are.
Let's say on processor one we set up a Small Hall Reverb and we set the PreDelay to 50. So, is the line pointing straight up, midpoint, when we set the PreDelay to 50?
We'll save that as user program 1. Now we'll set up user program 2, with the only difference being that we've turned the knob for PreDelay on our Small Hall Reverb so that it's set to 100.
Now we'll switch back to user program 1. Although the PreDelay is set to 50, I'm assuming the knob is no longer straight up but is somewhere far to the right of straight up. So let's say we want to change the PreDelay to 100 on this program. If the knob is somewhere way to the right of center, and we want to change from 50 to 100, will the knob continue to turn continuously until we reach 100?
My questions assume the knobs are not motorized. And my guess is that the knobs do indeed continue to turn either direction so that the full range of 0 to 100 is available. In which case, I don't really see what the lines are for.
