Alembic Guitars Club
Alembic products => Alembic Basses & Guitars => Topic started by: stout71 on November 24, 2013, 01:26:58 PM
-
Is anyone using a TRS 1/4 from their bass directly into the F-2B? I assume by looking at the inputs that a splitter cable is needed to preserve the stereo signal. Is that correct?
-
Yes; if you have a non-Series Alembic with Anniversary electronics, or if you are using the 1/4 jack in stereo mode on a Series instrument, then you can use a TRS splitter cable to send the neck pickup into one channel of an F-2B and the bridge pickup into the second channel. Instructions for how the cable should be wired can be found here (http://club.alembic.com/index.php?topic=274).
-
Perfect. Yeah - I have anniversary electronics and will be outputting in stereo mode. Thanks!
-
Does any cable manufacturer make an off the shelf TRS 1/4 90-degree instrument cable? The splitters are pretty easy to come by as well as straight TRS cables. The angled ones are eluding me.
-
Here you go friend !
Available here ; TRS& TS
Happy cable making,
Using heat shrink tubing helps ensure a firm strain relief as well !
http://www.markertek.com/Connectors-Adapters/Audio-Connectors/1-4in-Phone-Connectors/Switchcraft-Corporation/SW226.xhtml?utm_medium=shoppingengine&utm_source=googlebase&cvsfa=3786&cvsfe=2&cvsfhu=5357323336&gclid=CKT9m-Xi_roCFWEaOgodQ1oAGg (http://www.markertek.com/Connectors-Adapters/Audio-Connectors/1-4in-Phone-Connectors/Switchcraft-Corporation/SW226.xhtml?utm_medium=shoppingengine&utm_source=googlebase&cvsfa=3786&cvsfe=2&cvsfhu=5357323336&gclid=CKT9m-Xi_roCFWEaOgodQ1oAGg)
-
Jerry, I have a store bought Whirlwind with a 90 TRS and I also have a Custom made Bayou Audio cable that was not too expensive if you are not that handy with a soldering gun. The Whirlwind I have had for about 34 years.
-
I placed an order with Bayou. Thanks for the tip!