Alembic Guitars Club
Alembic products => Alembic Basses & Guitars => Topic started by: maclamb on March 08, 2007, 08:12:11 AM
-
Being a noob it would really help me to hear samples of what people refer to:growl, tone, mid range, low end, effects of a low pass filter, etc.
Perhaps this has been done to death...perhaps not.
How about a common format for post:
mp3 file (upload as attachment...will this work here?)
Bass:
Neck:
NeckType:
Body:
Frets:
Fingerboard:
Bridge:
NeckPU:
MiddlePU:
EQ/Tone controls
This might serve us to give us a common reference point for discussions, etc.
Plus if someone can test and post frequency - imagine how much we could learn!
-
I tried to upload my sample, but the 150K limit will make uploading samples an issue.
I am willing to take samples and post them on my web site, if ya'll want to do this.
-
Here's a sample of my series bass***** http://www.vmusicians.com/kbarnes/ (http://www.vmusicians.com/kbarnes/)
-
The Fog (http://members.home.nl/fclandstra//Pain-Grief/Cry%20Havoc/07TheFog.wma target=_blank)
Bass: '87 Spoiler
Neck: 3 piece Maple
NeckType: Neck Through body
Body: Mahogany with Coco Bolo or Bocate top
Fingerboard: Ebony
BridgePU: AXY, on
NeckPU: AXY, on
MiddlePU: N/A
EQ/Tone controls: Filter at 3/4 through a Digitech BP-8, intro = 2 tracks, one with an extreme phaser. Also used the Jazz bass for the low B where the guitar solo begins.
Weird stuff (http://members.home.nl/fclandstra//Pain-Grief/Cry%20Havoc/fc.WMA target=_blank)
Bass: Same Alembic as above (could be the '83 though, I don't remember...anyway, the specs are almost the same. Solid Koa body on the '83) Main riff = a Fender Jazz Bass V (1996 Anniversary ltd edition)
Neck: one piece Maple
NeckType: Bold on
Body: Alder with Flame Maple top + back
Fingerboard: Pao Ferro
BridgePU: Fender Jazz V, on
NeckPU: Fender Jazz V, on
MiddlePU: N/A
EQ/Tone controls: too long ago to remember :-)
Sorry for these crappy recordings :-)
-
Thanks FC - that's a start.
Keavin - was there a sound sample on your page that I missed?
-
oops - found it - thanks
-
In answer to your question; no, you can't upload sound files to the board. Most folks here have sound files on other servers and link to them.
-
One by Metallica and FC Spoiler (http://members.home.nl/fclandstra/onestukje.mp3 target=_blank)
Bass: '83 Spoiler
Neck: 3 piece Maple
NeckType: Neck Through body
Body: Solid Koa
Fingerboard: Ebony
BridgePU: AXY, on
NeckPU: AXY, on
MiddlePU: N/A
EQ/Tone controls: Filter at 3/4 Through Zoom 505 into my Laptop
Jason/Cliff Burton bass solo (http://members.home.nl/fclandstra/bassolotake1.MP3 target=_blank)
Bass: '83 Spoiler
Neck: 3 piece Maple
NeckType: Neck Through body
Body: Solid Koa
Fingerboard: Ebony
BridgePU: AXY, on
NeckPU: AXY, on
MiddlePU: N/A
EQ/Tone controls: Filter at 3/4 through Mesa stack with Morley PWB and E-H Little Big Muff. Recorded with DI and Vocal/drum mics also picked some up.
Lost (http://members.home.nl/fclandstra/Pain-Grief/The%20verry%20best%20of%20Pain-Grief/01%20Lost.wma target=_blank)
Bass: '87 Spoiler
Neck: 3 piece Maple
NeckType: Neck Through body
Body: Mahogany with Coco Bolo or Bocate top
Fingerboard: Ebony
BridgePU: AXY, on
NeckPU: AXY, on
MiddlePU: N/A
EQ/Tone controls: Filter at 3/4 through a Digitech BP-8
Jason Newsted solo (http://members.home.nl/fclandstra/Bassone.mp3 target=_blank)
Bass: '91 Fender Prodigy with Alembic Activators
Neck: Maple
NeckType: Bolt on
Body: Poplar
Fingerboard: Rosewood
BridgePU: Alembic J, on
NeckPU: Alembic P, on
MiddlePU: N/A
EQ/Tone controls: Filter at 3/4 Through Zoom 505 into my Laptop
The same Jason Newsted solo (http://members.home.nl/fclandstra/Basstwo.mp3 target=_blank)
Bass: '83 Spoiler
Neck: 3 piece Maple
NeckType: Neck Through body
Body: Solid Koa
Fingerboard: Ebony
BridgePU: AXY, on
NeckPU: AXY, on
MiddlePU: N/A
EQ/Tone controls: Filter at 3/4 Through Zoom 505 into my Laptop
I forgot to mention: I always play with Q switch on ;-)
-
Here are a few songs using my Europa 5 w/ Series I.
http://www.3dbdown.com/multimedia.php (http://www.3dbdown.com/multimedia.php)
Bones
-
You could buy my cd Down Below by Doomtree. Lots of samples there.
02 excel 5
5pc maple walnut pinstripe
set neck
alder w flame maple
pau ferro
dual fatboys
all tone vol full up
f1x-sf2-plx3402-acme low b2 miked and direct from f1x into protools mixed at Grandmaster Studio Hollywood by Doomtree and Andrew Alekiel through a vintage Neve 8028 console. The last all Class A console Neve ever built.
-
Hi, it's Alembic, trust me it will do what you want...Mark
-
Tell me where and how Danno, I'd like to have a copy.
Olie
-
Me too! Post a website where it is available for purchase. Maybe there should be a section in the forum where Alembic club members could post there commercially available CD'S and DVD'S. I ordered the Apache Indian DVD and I would love to get the Doomtree CD also.
Mike
-
You can get the Doomtree CD at Amazon.com
-
You are all too kind! Its also available at Best Buy, Virgin, FYE and other retailers. We are distributed by Koch so any local shop can order it. As Dave so kindly posted, Amazon, CD now, Ebay etc. Careful that an ebay one is not a demo. The full version has some video of rehearsals and recording/mixing. Thanks in advance!
-
Hi Bones,
I just listened to your song (soundtrack) and it was sooooo nicceeeee, beautiful song.
Very good, Paul