Alembic Guitars Club
News & FAQs => FAQ => SF-2 Superfilter => Topic started by: mica on April 03, 2006, 09:12:59 PM
-
A wide voltage range is acceptable, from 10.5 - 17VDC rated at 70-100mA (or more) with a miniature coaxial connector.
Actual measurements are 55mA @ 17.5VDC (approx 1 W) and 50mA@12VDC (approx 600mW)
Important: Make sure the center contact of the connector is positive. If you use the wrong polarity, a choke will burn out and need replacing, but the rest of the unit will be intact.
(Message edited by mica on July 24, 2015)
-
Look for a graphic similar to this:
(http://club.alembic.com/Images/16271/211409.jpg)
-
The diameter of the connector is 2.1mm