Alembic Guitars Club
Alembic products => Alembic Basses & Guitars => Topic started by: zomnius on August 10, 2018, 01:28:18 AM
-
I want to use a wireless system for my series bass. Anyone have experience with this?
Thx!
R>
-
You can always check out the Line6 Relay G90 in Fryslan :-)
The digital systems are best, especially for Alembics. Wide frequency range (10Hz-20kHz for the Relays) and no noise.
Mono 1/4 wiring instructions can be found here: http://club.alembic.com/index.php?topic=270.0 (your SII might have mono wiring already)
If you need the Leds, you are going to need a battery powered power supply. (iirc the leds don't work with the 2 internal batteries) You'll might be able to rewire, but I guess the batteries will be sucked dry in no time.
Stay away from systems with a TRS plug (stereo)
-
You do understand that you will be using your Series in mono mode with a wireless. You would need to use two transmitters and receivers to go stereo. That being said, I would strongly recommend the PRA Audio Systems WiC. I've been using one for a couple of years. By far the best sounding, and easiest to use wireless I've tried.
Bill, tgo
-
There is some interesting information further down in this thread:
http://club.alembic.com/index.php?topic=23925.0 (http://club.alembic.com/index.php?topic=23925.0)
-
Check this one too
http://club.alembic.com/index.php?topic=23788.0