Alembic Guitars Club
Alembic products => Owning an Alembic => Troubleshooting => Topic started by: tomhug on September 09, 2016, 07:50:49 PM
-
I am not sure if this post belongs in "Alembic Basses & Guitars", "Owning an Alembic/Troubleshooting", or "Dreaming... for now". Mods - feel free to move this to a more appropriate area if warranted.
So in the space of about 2 weeks (about 5 months ago), 2 different Essence basses became available to me:
(https://c4.staticflickr.com/9/8152/28951145483_ca816b4fcb_z.jpg)
(https://c7.staticflickr.com/9/8168/29464636742_beea27568b_z.jpg)
I love the Essences' physical playing platform, and I really like that both of my 5-strings now have the same shape. What's not working quite so well for me is the stock filter EQ circuit for these. I am evaluating my options, and I'd like hear any ideas or experiences that others have had.
Option #1) If I could snap my fingers, I'd just wish both of these basses to be East-meets-West and I think that would totally cover my bases (er - basses). Problem with that is I'd need to have significant routing done, plus the additional holes in the top. Is this type of modification even viable to consider?
Option #2) On the other end of the least destructive mod, would be the addition of a 3-position Q switch.
Option #3) Somewhere in between of those two options, my thoughts would be to simply swap the "Activator with Filter" circuit for the "Activator with Bass/Treble" circuit. This is the option I am leaning towards, for the following reasons: 1) The basses that preceded these two (an Epic and an Orion) both had the Bass/Treble and I know these worked for the genres I play most frequently 2) When I feel that I need the Alembic Filter sound, I have my Series I with CVQ upgrade to "scratch that filter itch".
Any other options/approaches I should consider?
-
Why don't you send me that fretless, and I'll see if I can't work on it at some point. (She's a beauty!!)
-
I recommend starting with the 3-way Q-switch. I added one to my Orion with Essence controls and it made a world of difference.
-
Why don't you send me that fretless, and I'll see if I can't work on it at some point. (She's a beauty!!)
Thanks, I'll keep that in mind. :-)
-
I recommend starting with the 3-way Q-switch. I added one to my Orion with Essence controls and it made a world of difference.
Yeah, I've been wavering between swapping to the Bass/Treble circuit or just adding the Q. I could even leave it in the cavity until I decide I like it (without drilling a hole). I don't really switch between Q values that often. I think getting something to attenuate the peak in the filter circuit would get me very close to my sonic goals. I am just wondering if it will get me all the way there...
Thanks
-
I'm owner of Essence V and I'm not happy about tone controls. High-pass filter is not enought. I bought John East BTB01 that I use it as an external preamp. It works very well. I can adjust the bass and treble in a double potentiometer. I highly recommend such a solution. It works outside of guitar but I'm thinking about set up this onboard.
-
Definitely add the Q switch. I'm doing the same with my Essence 5, and did the same with my prior Essence 4. The upgrade is worth it
I'm also using the Yamaha NE-1 (Nathan East Pre Amp) and the SFX AY2 (NE-1 inspired) - those pedals really add a lot of tonal options on the fly.
-
I'm owner of Essence V and I'm not happy about tone controls. High-pass filter is not enought. I bought John East BTB01 that I use it as an external preamp. It works very well. I can adjust the bass and treble in a double potentiometer. I highly recommend such a solution. It works outside of guitar but I'm thinking about set up this onboard.
One of my friends uses an on-board John East. These are very effective preamps. However that preamp is probably not the correct choice for my particular specific application. One of the things I love about my Alembics is when other bassists or musicians are shocked to learn that I am playing an active bass. With either the filter or the Bass/Treble circuits, there's something about these circuits that are somehow more "organic" than most preamps.
Definitely add the Q switch. I'm doing the same with my Essence 5, and did the same with my prior Essence 4. The upgrade is worth it
I'm also using the Yamaha NE-1 (Nathan East Pre Amp) and the SFX AY2 (NE-1 inspired) - those pedals really add a lot of tonal options on the fly.
I wasn't aware of of the Nathan East or the SFX Preamp.
My preferred style is to run my amp very flat and use the on-board bass for any tone control. I've never considered running an out-board preamp. I probably still wouldn't consider it for no other reason than I am stubborn and set in my ways (!). In fact I am probably too reluctant to use my amp's tone controls to make other adjustments. (because I am stubborn and set in my ways (!))
I guess why I posted this question is because the Bass/Treble circuits in my recently departed Orion and Epic got me where I needed to be while still running pretty flat on the amp. And, of course, East-meets-West is "all of the above"
Thank you both for the suggestions.