Alembic Guitars Club

Connecting => Miscellaneous => Topic started by: robinc on April 28, 2009, 02:42:02 PM

Title: PA advice please!
Post by: robinc on April 28, 2009, 02:42:02 PM
Greetings all,
 
I'm on the hunt for a PA setup that can accommodate my band. We really only need about 6-10 inputs for mics/micing acoustic instruments, the amplified instruments can go through their own amps and drums are loud as hell anyway so no need to worry about that just yet. Powered mixer or mixer and power amp, it makes no difference to me, so long as it can handle restaurant/bar gigs and small (200-400) outdoor venues. We already have two speaker stands, just need cabs to put on them.
 
There seem to be a lot of different options out there. I've been watching cl for the past few days and I've seen a lot of units that looked like they could work, but in the interest of doing my homework and not ending up with a piece of sh!t I bring my enquiries to the forum.
 
Any advice on gear to jump on or steer clear of would be greatly appreciated. Thanks!
Title: PA advice please!
Post by: jerryme on April 28, 2009, 02:48:45 PM
www.carvin.com (http://www.carvin.com)
www.musiciansdiscountwarehouse.com
Title: PA advice please!
Post by: lbpesq on April 28, 2009, 03:03:42 PM
Robin:
 
A few years ago I got rid of my big rack P.A. and bought a Mackie 808s.  One of the best moves I've made.  Small and relatively light, it has two 600 watt amps that can either run both mains and monitors or, for larger venues or outdoors, I can run the mains with 600 watts to each side and take a monitor send off the Mackie to a separate power amp.  I LOVE this thing.  It's more than adequate for every situation where I've had to schlepp the P.A.  For bigger situations, there's usually a P.A. already there.
 
Bill, tgo
Title: PA advice please!
Post by: terrace on April 28, 2009, 04:34:21 PM
Yorkville & Yamaha make great gear that's just about bulletproof.The Yorkville Powermax board
has 4 internal poweramps and great patching abilities.
Title: PA advice please!
Post by: keith_h on April 28, 2009, 04:37:01 PM
You didn't give a budget.  
 
Look at the Allen & Heath MixWizard boards. They are very highly thought of in the small format mixer arena. The 12:2 has 8 XLR mike inputs and built in effects. The 14:4:2 has 10 XLR mike inputs and no effects but a 4 channel bus. The 16:2 has 16 XLR mike inputs and built in effects (this is what I use). If you decide to add subs later on you can drive them through Aux 6 (i.e. Aux fed subs) Aux 1-4 are great for monitor mixes.  
 
Match this up with some self powered speakers like JBL's PRX or QSC HPR series. This should give you a pretty decent small system that can easily be expanded to subs and monitors later.
 
It would also be a good idea to look at and search the ProSoundWeb forums (http://www.prosoundweb.com/forums/). They have all types of discussions about PA's and equipment in the LAB Lounge.
 
Keith
Title: PA advice please!
Post by: crobbins on April 28, 2009, 05:19:57 PM
This is what I use..(http://club.alembic.com/Images/449/64526.jpg)
Title: PA advice please!
Post by: lbpesq on April 28, 2009, 05:35:05 PM
Looks a lot like my Mackie.
 
(http://club.alembic.com/Images/449/64530.jpg)
 
Bill, tgo
Title: PA advice please!
Post by: mike1762 on April 28, 2009, 07:10:59 PM
I have a Phonic Helix 24 MKII mixer.  It is rack-mountable and has FireWire output; therefore, it's a decent back-up for my studio set-up.  If you don't already have digital recording capability, this would kill 2 birds w/1 stone.  My speakers are powered Behringer EUROLIVE B415DSPs.  They are bi-amped at 600-Watts with a 15 woofer and a 1.75 titanium driver... very loud (but heavy).
Title: PA advice please!
Post by: crobbins on April 28, 2009, 07:44:30 PM
Mackie makes  good board. I have a 1640 onyx with the firewire card in my home studio...
Title: PA advice please!
Post by: crobbins on April 28, 2009, 08:14:38 PM
Double post oops.  
 
(Message edited by CRobbins on April 29, 2009)
Title: PA advice please!
Post by: terryc on April 29, 2009, 02:27:48 AM
JBL make some good powered speaker units, the last band I was used them, we were steered clear of the Mackie stuff as the grills were 15 but the drivers were 12.
The JBL Aon had 15 drivers in them and were plenty powerful for small venues.
Having said that it may be different for you USA guys
Title: PA advice please!
Post by: bsee on April 29, 2009, 07:48:56 AM
The 808s is a great choice.  If you need a few more channels for whatever reason, you can slave a cheap mini-mixer to one of the stereo channels.  Most gigs, mono with 600 watts for the mains and 600 for the monitors is plenty.  
 
Alternately, Mackie makes a larger version called the PPM1012 that looks even better if you want to deal with transport.  
 
As for cabs, I like neo speakers for transportability.  If you have the budget, JBL gets high grades for the EON line.  If not, Peavey has a cab that can be picked up for $200 a piece.
 
If you're thinking about powered cabs, you should consider the weight in throwing them up on the stands.  It's why I opted for the powered mixer alternative.  
 
As a side note, my bass rig runs through a QSC 24xx power amp.  I only need one side, so the other side can back up or augment the PA if more power is needed.
Title: PA advice please!
Post by: robinc on May 03, 2009, 04:02:41 PM
This unit
http://pro-audio.musiciansfriend.com/product/Behringer-PMP2000E1220-PA-Package?sku=630219 (http://pro-audio.musiciansfriend.com/product/Behringer-PMP2000E1220-PA-Package?sku=630219)
 
is available to me used. He is asking $650. Anyone had any experience with it? Seems to have gotten strong reviews...
Title: PA advice please!
Post by: olieoliver on May 03, 2009, 04:11:23 PM
I've had nothing but bad experiences with Behringer PA gear. The boards are noises and not very durable. While their price is very enticing you get what you pay for.  
 
OO
Title: PA advice please!
Post by: bsee on May 03, 2009, 04:19:20 PM
Based upon their past history, I would never buy anything Behringer for a critical application.  They're fine for a home practice amp or even something I might use for home recording, but I wouldn't gig any of their stuff without a backup.
Title: PA advice please!
Post by: kimberly on May 03, 2009, 04:22:38 PM
Hi Robin,    
 
  What Olie says about Behringer.  Hate to talk bad, but I tried to 'cheap out' a couple of years ago and went through through three of their powered mixers in about two months, the last which died on a gig.  Granted I've seen a few that seem to be bullet proof, but that's the exception based on my experience.  Then there's their supposed 'power ratings'.  I have no idea how they calculated their watts per channel, but overly optimistic is an understatement.  ;)
 
  Buyer beware.  
 
  Best Regards,
 
  Kimberly  
Title: PA advice please!
Post by: keith_h on May 03, 2009, 05:21:47 PM
I would stay away from Behringer new or used for all of the reasons stated and then some. You are better off spending a little more for true Pro audio. Keep in mind the old adage, buy once, cry once.  
 
Why don't you give us an idea of your budget and maybe folks can be more specific.  
 
Keith
Title: PA advice please!
Post by: robinc on May 03, 2009, 10:18:44 PM
well! This is precisely why I love this forum. Thanks for the advice, everyone!
Title: PA advice please!
Post by: robinc on May 03, 2009, 10:22:04 PM
keith, another one of my favorites is buy cheap, buy twice. good advice to keep in mind/
Title: PA advice please!
Post by: lbpesq on May 04, 2009, 07:26:41 AM
Behringer:  the Yugo of sound equipment.
 
Bill, tgo
Title: PA advice please!
Post by: paulman on May 04, 2009, 07:59:16 AM
We have a couple Bose PS-1's for our backline.  They work kick ass but are not a wallet friendly purchase.  
 
No like Behringer, heap bad medicine.  
 
Roger (TTK)